POCKET DOOR
WALL MOUNT
BYPASS
MULTI-PASS
BI-FOLD
MULTI-FOLD
100SD PART SETS
Use these part sets in combination with track lengths below to build your own custom hardware set.
2-DOOR PART SET
4 - 1125 BALL BEARING HANGERS
1 - 2155 DOOR STOP
1 - 101 DOOR GUIDE
1 - 1712 WRENCH
2 - 30 US3 PULLS
click here to
3-DOOR PART SET
6 - 1125 BALL BEARING HANGERS
1 - 1155 TRACK STOP
2 - 2155 DOOR STOP
2 - 101 DOOR GUIDE
3 - 30 US3 PULLS
4-DOOR PART SET
8 - 1125 BALL BEARING HANGERS
2 - 1155 TRACK STOP
4 - 30 US3 PULLS
CLICK HERE FOR 100SD HARDWARE SETS
100 TRACK
Track mounting screws included with part sets above. Track can be cut down to shorter lengths.
100SD PARTS
All screws included with parts where applicable.
1125
DRAWING
BALL BEARING HANGER
FOR DOOR UP TO 200lbs. [91kg.]
101
NYLON DOOR GUIDE SET
1712
1155
2155
FLUSH PULL SET
2-1/8" [28mm] DIA.
OTHER FINISHES AVAILABLE
2031
SINGLE POST DOOR GUIDE
2054PLBG
MULTI-DOOR PULL CATCH SET
FOR USE WITH 2 OR MORE SLIDING DOORS
OPTIONAL BOTTOM DOOR GUIDE PARTS
NOTE: If desired, a bottom track/guide may be used instead of standard surface mounted guides. This guide may be surface mounted, recessed in the floor or the door.
PART NO.
DESCRIPTION
1705
BOTTOM DOOR GUIDE
1050-072
72" [1829mm] GUIDE TRACK LENGTH
96" [2438mm] GUIDE TRACK LENGTH
106" [2692mm] GUIDE TRACK LENGTH
144" {3658mm] GUIDE TRACK LENGTH
© 2012 L.E. Johnson Products, Inc.
info@johnsonhardware.com
Tel. 1-800-837-5664, Fax 1-800-837-4697
Tel. 1 574-293-5664, Fax 1 574-294-4697
