2700 series Pocket Door Frames HARDWARE INDEX

MAX DOOR SIZE: 36" x 80" x 1-3/8" [914mm x 2032mm x 35mm]

MAX DOOR WEIGHT: 200lbs. [91kg.] EACH*

FINISHED WALL THICKNESS: 4-9/16" [115mm]

Single Pocket Door

SINGLE POCKET DOOR

Converging Pocket Door

CONVERGING POCKET DOORS

PRE FABRICATED AND PRE ASSEMBLED POCKET DOOR FRAME for use in standard 4-9/16" (115mm) thick walls sheeted with drywall. Removable aluminum track with convex rails, rust resistant steel  reinforced frame stiffener, jump proof three wheel hangers and self adjusting floor anchors.  Plaster ground on frame accepts up to 1/2" (12mm) plaster board material. Horizontal members provide solid support for wall materials, and the center member is located at 48" (121.9cm) center for horizontal plaster board installations. Standard track and hangers are 111 Series, but for heavier doors, the 100 Series track and 1125 hanger combination is available for door up to 200lbs. (91kg.). An adjustable steel bracket on the header fastens directly to the rough stud at the opening side. This allows the finished jamb to be installed after rough construction is completed, preventing damage to finished materials. * Optional track and hanger combinations available for doors up to 200 lbs. [91 kg.]

2700 FRAME TECHNICAL INFORMATION

2700 INSTALLATION INSTRUCTIONS


SINGLE DOOR ROUGH OPENING DIMENSIONS


CONVERGING DOOR (2 DOOR) ROUGH OPENING DIMENSIONS


SPECIAL APPLICATION drawings


HANDICAP ACCESS INSTALLATIONS


BECOME A 2700 SERIES FABRICATOR

SIDE VIEW

2711headerdetail.gif (60476 bytes)

2711 HEADER DETAIL

2710headerdetail.gif (44357 bytes)

2710 HEADER DETAIL

2700 SERIES EXCEPTIONAL FEATURES

Steel Nailer Brackets

Steel header bracket nails to rough stud or fasten to brick. Steel floor bracket easily nails or screws to sub or slab floor. Finish jamb can then be installed later.

100keyhole.JPG (42982 bytes)

Removable Track

Track is removable for maintenance if necessary. Convex rail features one point contact, and two dust traps.

Steel Stiffener

Full length, special steel stiffeners assure strong straight jambs.

Protected Shipping

Frame is shipped KD (knocked down), covered on the face edges to prevent damage.

2700 SERIES SET COMPONENTS

DRAWING

111 (2711)

ALUMINUM TRACK

DRAWING

1020

STANDARD HANGER

FOR DOORS UP TO 80 lbs.

DRAWING

1025

HEAVY-DUTY HANGER

FOR DOORS UP TO 125 lbs.

DRAWING

100 (2710)

ALUMINUM TRACK

DRAWING

1120 (2710)

100 TRACK HANGER

FOR DOORS UP TO 125 lbs.

DRAWING

1125 (2710)

100 TRACK HANGER

FOR DOORS UP TO 200 lbs.

DRAWING

1550

DOOR GUIDE

DRAWING

1712

ADJUSTMENT WRENCH

INSTALLATION HARDWARE

THE 2700 SERIES POCKET DOOR FRAME IS NOT AVAILABLE FOR ON-LINE PURCHASE DUE TO ITS BULKY SIZE AND IS NOT SUITED FOR INDIVIDUAL SHIPMENTS.

 

 
AS AN ALTERNATIVE, THE JOHNSON HARDWARE 1500 SERIES 'KNOCK DOWN' FRAME IS AVAILABLE FOR ON-LINE PURCHASE. THE 1500 SERIES AND 2700 SERIES ARE IDENTICAL IN FUNCTION AND INSTALLATION TIME, THE ONLY DIFFERENCE IS THE INSTALLATION METHOD.

click here to

Buy On-Line

2711 POCKET DOOR FRAMES

2711 FRAME FIT IN STANDARD 2 X 4 STUD WALLS and accepts door 3/4" to 1-3/8" thick.


SINGLE DOOR

SINGLE DOOR ROUGH OPENING DIMENSIONS


Converging Pocket Door CONVERGING DOORS = 2 FRAMES + 1 1555PPK3

CONVERGING DOOR (2 DOOR) ROUGH OPENING DIMENSIONS

MAX DOOR WEIGHT: 80lbs. [36kg] EACH

PART NO. DESCRIPTION DOOR WIDTH DOOR HEIGHT DOOR THICKNESS
27112068

Frame Contents:

1 - 111 Header Length

1 - ASSEMBLED FRAME

2 - 1120 Hangers

1 - 1513 Door Stop

1 - 1550 DOOR GUIDE

1 - 1712 Wrench

24" (2'-0")

[609mm]

80" (6'-8")

[2032mm]

3/4" - 1-3/8"

[19mm - 35mm]

27112468

28" (2'-4")

[711mm]

80" (6'-8")

[2032mm]

3/4" - 1-3/8"

[19mm - 35mm]

27112668

30" (2'-6")

[762mm]

80" (6'-8")

[2032mm]

3/4" - 1-3/8"

[19mm - 35mm]

27112868

32" (2'-8")

[813mm]

80" (6'-8")

[2032mm]

3/4" - 1-3/8"

[19mm - 35mm]

27113068

36" (3'-0")

[914mm]

80" (6'-8")

[2032mm]

3/4" - 1-3/8"

[19mm - 35mm]

MAX DOOR WEIGHT: 150lbs. [68kg] EACH

PART NO. DESCRIPTION DOOR WIDTH DOOR HEIGHT DOOR THICKNESS
27112068

Frame Contents:

1 - 111 Header Length

1 - ASSEMBLED FRAME

2 - 1125 Hangers

1 - 1513 Door Stop

1 - 1550 DOOR GUIDE

1 - 1712 Wrench

24" (2'-0")

[609mm]

80" (6'-8")

[2032mm]

3/4" - 1-3/8"

[19mm - 35mm]

27112468

28" (2'-4")

[711mm]

80" (6'-8")

[2032mm]

3/4" - 1-3/8"

[19mm - 35mm]

27112668

30" (2'-6")

[762mm]

80" (6'-8")

[2032mm]

3/4" - 1-3/8"

[19mm - 35mm]

27112868

32" (2'-8")

[813mm]

80" (6'-8")

[2032mm]

3/4" - 1-3/8"

[19mm - 35mm]

27113068

36" (3'-0")

[914mm]

80" (6'-8")

[2032mm]

3/4" - 1-3/8"

[19mm - 35mm]

 

2710 POCKET DOOR FRAMES

2710 FRAME FIT IN STANDARD 2 X 4 STUD WALLS and accepts door 1" to 1-3/8" thick.


SINGLE DOOR

SINGLE DOOR ROUGH OPENING DIMENSIONS


Converging Pocket Door CONVERGING DOORS = 2 FRAMES + 1 1555PPK3

CONVERGING DOOR (2 DOOR) ROUGH OPENING DIMENSIONS

MAX DOOR WEIGHT: 125lbs. [57kg] EACH

PART NO. DESCRIPTION DOOR WIDTH DOOR HEIGHT DOOR THICKNESS
27102068

Frame Contents:

1 - 100 Header Length

1 - ASSEMBLED FRAME

2 - 1120 Hangers

1 - 1550 Door Guide

1 - 1513 Door Stop

1 - 1712 Wrench

24" (2'-0")

[609mm]

80" (6'-8")

[2032mm]

1" - 1-3/8"

[25mm - 35mm]

27102468

28" (2'-4")

[711mm]

80" (6'-8")

[2032mm]

1" - 1-3/8"

[25mm - 35mm]

27102668

30" (2'-6")

[762mm]

80" (6'-8")

[2032mm]

1" - 1-3/8"

[25mm - 35mm]

27102868

32" (2'-8")

[813mm]

80" (6'-8")

[2032mm]

1" - 1-3/8"

[25mm - 35mm]

27103068

36" (3'-0")

[914mm]

80" (6'-8")

[2032mm]

1" - 1-3/8"

[25mm - 35mm]

MAX DOOR WEIGHT: 200lbs. [91kg] EACH

PART NO. DESCRIPTION DOOR WIDTH DOOR HEIGHT DOOR THICKNESS
27102068

Frame Contents:

1 - 100 Header Length

1 - ASSEMBLED FRAME

2 - 1125 Hangers

1 - 1550 Door Guide

1 - 1513 Door Stop

1 - 1712 Wrench

24" (2'-0")

[609mm]

80" (6'-8")

[2032mm]

1" - 1-3/8"

[25mm - 35mm]

27102468

28" (2'-4")

[711mm]

80" (6'-8")

[2032mm]

1" - 1-3/8"

[25mm - 35mm]

27102668

30" (2'-6")

[762mm]

80" (6'-8")

[2032mm]

1" - 1-3/8"

[25mm - 35mm]

27102868

32" (2'-8")

[813mm]

80" (6'-8")

[2032mm]

1" - 1-3/8"

[25mm - 35mm]

27103068

36" (3'-0")

[914mm]

80" (6'-8")

[2032mm]

1" - 1-3/8"

[25mm - 35mm]

 

2700 OPTIONAL ACCESSORIES
PART NO. DESCRIPTION BUY NOW!

15103068

DRAWING

POCKET DOOR JAMB KIT

36" x 80" x 4-9/16"

[914mm x 2032mm x 115mm] OPENING

FACTORY PRIMED, READY FOR PAINTING

click here to

Buy On-Line

15113068

POCKET DOOR JAMB KIT

36" x 80" x 4-9/16"

[914mm x 2032mm x 115mm] OPENING

CLEAR PINE, READY FOR STAINING

1555PPK3

CONVERGING DOOR KIT

(USED FOR JOINING 2 POCKET DOOR FRAMES)

1555PPK3 INSTALLATION INSTRUCTIONS

BUY ON-LINE | PRODUCTS | INSTALLATION INSTRUCTIONS | IMAGE GALLERY | DISTRIBUTORS | COMPANY

Johnson Hardware Manufacturers of Sliding, Folding and Pocket Door Hardware

© 2016 L.E. Johnson Products, Inc.

 info@johnsonhardware.com

Tel. 1-800-837-5664, Fax 1-800-837-4697

Tel. 1 574-293-5664, Fax 1 574-294-4697