A
real clothing organizer. Hangers are separated eliminating "hanger
overlap". Wardrobes stay neat and orderly. Clothing stays fresh and
unwrinkled. Deep drawn hanger slot in the gold enameled steel Valet/rod
will not scratch hangers, provide strength to rod as well as the shelf
above. Available bulk only in 96" (2438mm) lengths. Can be easily
cut for smaller shelves. Use short lengths near washers for drip dry or
wrinkle free.
WARDrod
An
extendable rod made of 22 gauge
bright zinc plated 1" (25mm)
dia. tubing.
Rust resistant. Six popular sizes for 18" to 144" (457mm
to 3657mm) wardrobes. End brackets have "locking" action
eliminating accidental removal. Hangers move easily past overlapping
joint because of chamfered end tube. For spans longer than 48"
(1219mm) supports are required, shown below. Available in packaged sets
for retail sales, or in bulk for contractors.
18"
EXTENDS TO 30"
30"
EXTENDS TO 48"
48"
EXTENDS TO 72"
*72"
EXTENDS TO 96"
*72"
EXTENDS TO 120"
*96"
EXTENDS TO 144"
*Shipped with
one 9028 Rod Support with each rod
RODS OVER 48" (1219mm)
LONG REQUIRE ROD SUPPORTS EVERY 48" (1219mm).
WARDROBE
ACCESSORIES
9027
FOR
1-3/8"
(35mm)
POLES
9028
FOR
1" (25mm) ROD
ROD
SUPPORTS
Supports
wardrobe rods when longer than 48" (1219mm) spans are
encountered.
-
9027 is for wood poles up
to 1-3/8" (35mm) in dia. Use with 9030 end sockets.
-
9028 is for 1" (25mm) dia. WARD.rod. Heavy gauge, bright zinc
plated, non-rusting steel. Screws supplied.
PART
NO.
DESCRIPTION
9027PLBG
1-3/8" (35mm) POLES
9028PLBG
1" (25mm) RODS
9030
POLE
SOCKETS
White
plastic end supports for 1-1/4" dia. for wood pole. Screws provided. Use
brad (not supplies) to keep "U" shaped end upright. Use with
9027 Rod Support or 9003 - 9005 Shelf Rod Support.
PACKAGED
BULK
PART
NO.
QTY/CTN
PART
NO.
QTY/CTN
9030PPK3
10 SETS
9030PLBG
100 SETS
9003
9005
SHELF
AND ROD SUPPORTS
White
powder coated, 12 gauge steel. Used with either WARD/rods or wood poles.
Supplied with screws.
A
real clothing organizer. Hangers are separated eliminating "hanger
overlap". Wardrobes stay neat and orderly. Clothing stays fresh and
unwrinkled. Deep drawn hanger slot in the gold enameled steel Valet/rod
will not scratch hangers, provide strength to rod as well as the shelf
above. Available bulk only in 96" (2438mm) lengths. Can be easily
cut for smaller shelves. Use short lengths near washers for drip dry or
wrinkle free.
An
extendable rod made of 22 gauge
bright zinc plated 1" (25mm)
dia. tubing.
Rust resistant. Six popular sizes for 18" to 144" (457mm
to 3657mm) wardrobes. End brackets have "locking" action
eliminating accidental removal. Hangers move easily past overlapping
joint because of chamfered end tube. For spans longer than 48"
(1219mm) supports are required, shown below. Available in packaged sets
for retail sales, or in bulk for contractors.
